2300XPC Shovel

  • Designed for severe-duty digging, the 2300XPC features:
    • Automatic lubrication and compressed air systems with advanced diagnostic and control
    • Temperature monitoring system for all DC motors, drum shaft bearings and shipper shaft bearings
    • Automatic boom soft setdown system (ABSS) and boom profile protection envelope to prevent excessive loading to the attachment
    • Anti-swing-in-bank system that reduces excessive side loading on handle and attachment
    • Remote hoist control pendant and hoist rope winch
    • House pressurization system that provides filtered air for cooling and dust repression
  • Rugged components include:
    • Dual hoist motors for balanced and evenly distributed load
    • DELTA drive for improved shoe-to-tumbler engagement
    • Planetary transmissions for proven long life on swing and propel
  • Technology includes:
    • Centurion electrical control system with superior performance, monitoring and data integration capabilities
    • Universal shovel interface for sending and receiving data to any mine management system
    • PreVail Remote Health Management for real-time machine health and performance management

Contact your Joy Global representative for more information on the 2300XPC shovel.

Working Ranges

Height of cut 13.5 m 44 ft. 3 in.
Radius of cut 21.3 m 70 ft. 0 in.
Dumping height* (door open) 8.5 m 28 ft. 0 in
Floor level radius 14.2 m 46 ft. 7 in.
Tail swing radius 10.1 m 33 ft. 0 in.
Operator eye level 7.9 m 26 ft. 0 in.

 * Height shown with bail-type dipper. Heights will be greater with bail-less or compact bail dippers. Actual dumping height can be greater than door clearance height 

Capacity

Nominal payload* 45.4 mt 50 st.
Nominal dipper capacity
SAE struck
SAE 2:1

18.3-25.5 m3
20.2-27.8 m3

24.0-33.0 yd3
26.7-36.7 yd3
Rated suspended load 90.7 mt 100 st.
Optimum truck size 109-218 mt 120-240 st.

* Payload and dipper capacity are dependent on many factors. Contact Joy Global for an analysis of your specific application.  

Electrical Control Systems

P&H Digital DC Static DC Power Conversion and Reactive Power Compensation

  Hoist**/Propel Swing Crowd/Propel
Continuous Armature
Converter KW rating @600 VDC*
2x1860 kW 1860 kW 1860 kW
15 second armature
Converter current rating*
3700 amp. 3700 amp. 3700 amp.
Continuous field converter rating 150 amp. 150 amp. 150 amp.

* Rated at 600V and based on outside ambient temperature of 50C or 122F.
** Cascaded hoist converters
.

P&H Digital DC Automatic Reactive Power Compensation*

  60 Hz (7 step) 50 Hz (8 step)
Switched steps +4725 kVAR total +4500 kVAR total

* Nominal rating at rated capacitor voltage (600 VAC)

 P&H DC Fast Response Main Machinery Motors

Hoist motor (2 used) Continuous rating @600 V
peak developed power
Total 1074 kW / 1440 hp
1442 kW / 1933 hp
Swing motor (2 used) Continuous rating @550 V
peak developed power
Total 306 kW / 410 hp
748 kW / 1002 hp
Crowd motor (1 used) Continuous rating @550 V
peak developed power
Total 395 kW / 530 hp
441 kW / 591 hp
Propel motor (2 used) Continuous rating @550 V
peak developed power
Total 612 kW / 820 hp
943 kW / 1264 hp

 

Power Requirements

Supply voltage* 4160 or 7200V
3 Phase, 60 Hz
3300, 5000, 6000 or 6600
3 Phase, 50 Hz
Supply transformer Minimum 2000 kVA
Minimum short-circuit
VA available at shovel
16 MVA

* Voltage per customer requirements

Cable Data

Hoist (wire rope) diameter 57 mm 2.25 in.
Suspension (bridge strand) diameter 83 mm 3.25 in.
Dipper trip (wire rope) 13 mm 0.50 in.

Overall Dimensions

Width 12.5 m 40 ft. 10 in.
Length 15.0 m 49 ft. 4 in.
Height over gantry 11.6 m 38 ft. 0 in.
Width of crawler shoes

1321 mm
1778 mm

52 in.
70 in.

Width of crawlers (52") 8.7 m 28 ft. 5 in.
Length of crawlers 9.9 m 35 ft. 4 in.
Ground clearance 0.9 m 3 ft. 0 in.
Height - ground to bottom of counterweight slabs 2.6 m 8 ft. 5 in.

Ground Pressure and Weight

 

Bearing area - ground pressure  
Standard:
  Crawler bearing area
  52" shoes / 1321 mm
 19.92 m2

 30,880 in2

  Crawler ground pressure
  52" shoes / 1321 mm
 381 kPa  55.3  psi
Optional:
  Crawler bearing area
  70" shoes / 1778 mm
 26.82 m2  41,570 in2
  Crawler ground pressure
  70" shoes / 1778 mm
 288 kPa  41.8 psi
 Weights - approximate*  
 Working weight (with dipper, approximate weight)  
  52" shoes / 1321 mm  774,800 kg  1,708,000 lbs
  70" shoes / 1778 mm  787,500 kg  1,736,000 lbs
Counterweight (punchings)**  136,100 kg  300,000 lbs

* All weights subject to 5% variation.
** To be furnished by customer.

Electrical Control

  • Centurion Supervisory Controller for direct integrated communication with motor drives
  • Profibus communications protocol for integration of all shovel subsystems
  • Enhanced graphical user interface with icon-based screens that display shovel status, troubleshooting information, and production monitoring data.
  • Digital DC drive for solid-state power for main motion motors

Dipper and Dipper Trip

  • Optima dippers
  • Adjustable-torque electric motor with geared drive unit

Swing

  • Two modular P&H planetary gear cases
  • Spring-set air release disc brakes (one per motor)
  • Splash lube filtration system

Propel

  • Two P&H planetary gear cases
  • P&H drive system with heavy-duty cast crawler shoes
  • Spring-set air release disc brakes - one per motor

Crowd

  • Powerband V-belt drive between motor and gear case
  • First and second reduction gearing in enclosed gear case
  • Twin-leg dipper handle with torsion box and rack-and-pinion drive
  • Spring-set air release disc brake

Hoist

  • Single enclosed gear case with filtered and cooled oil
  • Splash lubrication
  • 56" diameter hoist drum
  • Ferrule becket system
  • Dual electric tuggers
  • Spring-set air release disc brakes - one per motor